A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题，基于动态分层动网格技术，构建了含导弹运动和二次燃烧的内弹道数值模型，并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度，导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥，较大程度地缓解了冲击现象，获得了较好的平滑效果，筒底压力较实验装置降低了24.5%。     

预测悬停旋翼跨音速流动的一种组合自由尾流/CFD方法

一种新的组合自由尾流 / CFD方法用于悬停旋翼流动的 CFD解中以考虑实际尾流的作用 .用文中描述的尾流分析方法研究了螺旋尖涡的运动 .首先从广义尾流模型开始 ,用半经验公式模化了涡核对旋翼尾流的作用 ;然后在环量收敛和尾迹收敛的条件下完成了自由尾迹计算 ;最后应用 Jameson有限体积龙格 -库塔推进格式求解了欧拉方程 .所得结果与相关文献和实验数据进行了比较     

污水处理装置在冶金行业中的应用

对污水处理装置的技术参数、技术要求及设计方案的选择、工作原理做了进一步的阐述。对工业循环冷却水的处理有实际指导意义。     

夹杂物特征参数对拉伸载荷下超高强度钢裂纹萌生与扩展的影响

采用扫描电镜原位观测的方法,动态跟踪观察拉伸载荷作用下航空发动机轴类超高强度钢MA250中不同形状和尺寸的TiN夹杂导致裂纹萌生与扩展的微观行为,从微观角度分析拉伸载荷作用下夹杂物的几何长轴与外加载荷方向成不同角度时裂纹的萌生方式.同时讨论TiN夹杂中第一条裂纹萌生所需的应力与夹杂物面积的关系.结果表明,夹杂物面积越大,第一条裂纹萌生所需的应力越小.     

吸尘器弯管连接头模具的设计

分析了吸尘器弯管连接头的结构特点,着重阐述了应用于本模具中的一种新颖的专用来解决大角度,长距离抽芯的连杆机构的工作原理。对模具设计过程中遇到的困难,如:小嵌件如何固定,很小的侧型芯如何固定于侧滑块上,及三个液压缸按顺序抽芯,圆弧型芯如何插入圆柱型芯2中等都作了详细的叙述与探讨。另外本论文还涉及到了主要成型零部件的加工问题。     

对我国券商摆脱窘境的再思考

我国券商所遭遇的窘境是券商角色严重错位所致，过度膨胀的自营业务和理财业务导致券商资金“饥渴”。要摆脱所遭遇的窘境，应恢复券商从事产品创造和产品销售的本来面目，弱化资金博弈模型的买方业务，从资本和风险的角度综合安排融资结构和数量。正确处理做大与做强的关系，证券业的兼并重组如果不能体现优势互补、取长补短，并进行有效的资源整合和团队文化的融合，形成1＋1〉2的效应，将难以达到预期效果。所以，不但要关注数量和规模指标，更要关注质量和效率指标；不仅要注重短期的盈利能力，更要注重风险防范和风险控制能力。制定符合企业自身资源优势的个性化竞争战略规划，通过业务创新改善盈利模式并构筑其核心竞争力，这才是券商摆脱目前困境的关键所在。     

有关圆定理的几点讨论

经典圆定理只证明了奇点位于圆外的情况，本文用正则摄动法证明了源和汇位于圆上时，圆定理也是适用的。本文对奇点位于圆内时，应用圆定理的某些限制条件，也作了讨论。     

集中涡的细微结构和破裂机理初探

本文利用微分方程定性理论和分叉的基本概念,证明了在轴向逆压梯度时集中涡截面流态是一个附着螺旋点,且存在至少一个极限环。破裂截面上的流态对应于一个退化结点。由此推出破裂时有V_θ/r|_(r=o)=0。通过分析认为,涡破裂是由于涡轴上轴向逆压梯度的扰动自动放大造成的。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.